แสดงทั้งหมด 6 ผลลัพท์

LHR 75

FEATURES

LHR 75

This small pneumatic tool allows the operator to reach all the corners and difficult narrow area.  Despite it compact size, it maintains the typical BigFoot cutting ability by employing a 15mm (3/5”) orbit. The LHR 75 is primarily used for spot repair operations when it is critical to limit the working area and for the polishing of accessory items such as mirrors, etc.

TWO-HANDED HANDLE

The tool is so well balanced that the operator can easily control it with just one hand.  The rubber coated housing cover provides the operator maximum control and the two-handed handle allows for an ergonomic friendly front end grip.  Thanks to this feature, even a novice technician can easily handle the tool.

SPEED REGULATION

The variable speed dial is handy, easy to use and allows the operator to control the speed of the tool even when the tool is operating.

ANTISPINNING CAP

The Anti-spinning Cap has a double purpose.  It protects the operator and also prohibits the foam pads from spinning freely if the machine is accidentally turned on.  Prohibiting the free spinning reduces the stress on the foam pads and prolongs their life.

DESIGN

The unique hi-tech design makes the tool extremely comfortable to operate and has the added benefit of making it very easy for the operator to keep the buffing pad absolutely flat on the targeted surface.

DIRECTIONAL EXHAUST

The exhaust system is carefully designed for maximum noise abatement.  Further, the operator can adjust the exhaust so that air is blowing away from his/her arm and hand, maximizing comfort.

(COD. LHR75)

LHR 75E MINI

FEATURES

The LHR 75E mini is the polisher for difficult shapes and for spot repair operations. The LHR 75E mini is a must for any detailer wishing to obtain perfect results, even in the most difficult areas. Thanks to the backing pad with small diameter, the LHR 75E mini is perfect in polishing applications on small and intricate areas. The small machine dimensions and the 12 mm orbit allow a comfortable handling and accuracy in detail polishing.

ERGONOMICALLY PERFECT
With its non-slip rubber inserts on the front cover, the LHR 75E mini is perfect for all polishing operations in difficult to reach areas. The operator can work in perfect comfort to produce the best possible results.

ON-OFF SWITCH LOCK
Lined in non-slip rubber, the on/off lever of the BigFoot polisher ensures a controlled soft start, giving the operator full control over the tool.

DESIGN
The attention to detail is not limited to just the innovative and attractive design. The modern lines and exceptional technical quality are combined with a number of details that are the result of meticulous research aimed at achieving maximum operator comfort. The non-slip rubber inserts are numerous and have many functions. In particular, the insert on the machine body is used to support the polisher when placed on a surface.

MAXIMUM FLEXIBILITY

Thanks to the backing pad with small diameter, the LHR 75E mini is perfect in polishing applications on small and intricate areas. The small machine dimensions and the 12 mm orbit allow a comfortable handling and accuracy in detail polishing.

ELECTRONIC SPEED CONTROL MODULE

The speed controller is both practical and easy to use. The speed of the polisher can also be easily adjusted without interrupting the work.

(COD. LHR 75E mini)

LHR 12E DUETTO

FEATURES

Duetto is equally effective working with soft or interface backing pads teamed with micro-abrasives during the defect correction step or with foam polishing pads and compounds during the polishing stage. Extensive research on random orbital dynamics and exhaustive testing resulted in the choice of a 12mm orbit for duetto. This orbit length greatly improves the surface rectification abilities of the latest generation of microabrasive discs. The combination of duetto and microabrasives is especially effective when smoothing orange peel or significant defects. The finish generated by this combination is both homogeneous and predictable, with no deep sanding marks.

DUAL FUNCTION: SANDING AND POLISHING
The LHR 12E duetto and its 12 mm orbit can be used with fine grit abrasives to speed up deep correction operations. The tool can then use foams and compounds to refine the abrasive scratches and restore a lustrous finish.

ERGONOMICALLY PERFECT
With its non-slip rubber inserts in the front cover, the LHR 12E duetto is perfect for all polishing operations in difficult to reach zones. The operator can work in comfort to produce the best results possible.

ANTISPINNING SHROUD
The dual function antispinning shroud is designed to protect the operator against the moving parts and act as a clutch for the backing pad, preventing further stress on the foam polishing pad when it is not in direct contact with the surface.

DESIGN
The attention to detail is not limited to just the innovative and attractive design. The modern lines and exceptional technical quality are combined with a number of details that are the result of meticulous research aimed at achieving maximum operator comfort. The non-slip rubber inserts are numerous and have many functions. In particular, the insert on the machine body is used to support the polisher when placed on a surface.

ELECTRONIC SPEED CONTROL

The speed controller is both practical and easy to use. The speed of the polisher can also be easily adjusted without interrupting the work.

(COD. LHR12Eduetto)

LHR 15ES

FEATURES

LHR 15ES

The orbit of the LHR 15ES is 15mm or 3/5”.  It is shorter than the orbit of the LHR 21ES and is perfect for working in contoured areas and narrow surfaces, making it a favorite of detailers everywhere.  The LHR 15ES has less cutting capacity than its “Big Brother” but does offer a higher rpm level.  The medium sized pad (150mm or 6”), perfect balance and amazing lack of vibration make the LHR 15ES a “must-have” for every detailer!

TWO-HANDED HANDLE

The tool is so well balanced that the operator can easily control it with just one hand.  The rubber coated housing cover provides the operator maximum control and the two-handed handle allows for an ergonomic friendly front end grip.  Thanks to this feature, even a novice technician can easily handle the tool.

SPEED REGULATION

The variable speed dial is handy, easy to use and allows the operator to control the speed of the tool even when the tool is operating.

ANTISPINNING CAP

The Anti-spinning Cap has a double purpose.  It protects the operator and also prohibits the foam pads from spinning freely if the machine is accidentally turned on.  Prohibiting the free spinning reduces the stress on the foam pads and prolongs their life.

TRIGGER LOCK

The trigger lock on the right side of the handle can be depressed to lock the machine in motion.  This action allows the tool to run effectively without the operator continuously depressing the throttle lever and is a great help in one-handed applications.

DESIGN

The unique hi-tech design makes the tool extremely comfortable to operate and has the added benefit of making it very easy for the operator to keep the buffing pad absolutely flat on the targeted surface.

(COD. LHR15ES)

LHR 21ES

FEATURES

The LHR 21ES is characterized by a large 21mm (3/4”) orbit that guarantees fast cutting and an impressive finish.  The considerable size of the pads is perfect for working on panels and other large surfaces.  The tool’s design combine comfort, maneuverability and strength.

TWO-HANDED HANDLE

The tool is so well balanced that the operator can easily control it with just one hand.  The rubber coated housing cover provides the operator maximum control and the two-handed handle allows for an ergonomic friendly front end grip.  Thanks to this feature, even a novice technician can easily handle the tool.

SPEED REGULATION

The variable speed dial is handy, easy to use and allows the operator to control the speed of the tool even when the tool is operating.

ANTISPINNING CAP

The Anti-spinning Cap has a double purpose.  It protects the operator and also prohibits the foam pads from spinning freely if the machine is accidentally turned on.  Prohibiting the free spinning reduces the stress on the foam pads and prolongs their life.

TRIGGER LOCK

The trigger lock on the right side of the handle can be depressed to lock the machine in motion.  This action allows the tool to run effectively without the operator continuously depressing the throttle lever and is a great help in one-handed applications.

DESIGN

The unique hi-tech design makes the tool extremely comfortable to operate and has the added benefit of making it very easy for the operator to keep the buffing pad absolutely flat on the targeted surface.

(COD. LHR21ES)