Showing 81–96 of 138 results

SAM 41 S เครื่องขัดเยื้องศูนย์ แบบสั่น

– เล็กกระทัดรัดและน้ำหนักเบา
– เสียงรบกวนต่ำ แรงสั่นสะเทือนน้อย
– จับถนัดมือ ทำงานสะดวก
– มีระบบดูดฝุ่น
เยื้องศูนย์ : 3 มม.
ความร็วรอบ : 10,000 RPM
น้ำหนัก : 0.7 กก.

BODY SAW WPS 2000 เลื่อยตัดชิ้นส่วน

ตัดได้แม่นยำ และแรงสั่นสะเทือนน้อย
•น้ำหนักเบา
•สะดวก ใช้งานง่าย
•กินลมน้อย
•ประหยัดเวลา และค่าใช้จ่าย

ROLL OUT 2000 ถอด-เปลี่ยนกระจก

•ใช่งานง่าย
•สะดวกรวดเร็ว
•ทำงานเพียงคนเดียว
•ช่วยลดความผิดพลาดและความเสียหาย
•เพื่อผลงานที่มีคุณภาพสูง
•คุ้มค่าการลงทุน

LEX 3 150 / 7

Main strengths: powerful 7 mm sanding stroke removes material quickly and ensures rapid working progress, e.g. as an addition to the 4-step sanding process. Characterised by a low compressed air consumption, low vibration levels and a pleasant operating noise. Ideal in conjunction with the IAS 3 light hose for permanent dust extraction and high-quality working results.

Operating pressure (flow pressure) 6 bar
No. of strokes 20000 min­¹
Eccentric motion speed 10000 min­¹
Sanding stroke 7 mm
Vibration emission value ah (single-axel) 3,17 m/s²
Vibration emission value ah (three-axel) 5,8 m/s²
Air consumption at rated load 310 l/min
Sound pressure level 76 dB[A]
Sanding pad Ø 150 mm
weight 1,0 kg

LEX 3 150 / 5

Main strengths: large 5 mm sanding stroke ensures rapid working progress, a high-quality sanding finish, e.g. in 4-step sanding process. Characterised by a low compressed air consumption, low vibration levels and a pleasant operating noise. Ideal in conjunction with the IAS 3 light hose for permanent dust extraction and high-quality working results.

Operating pressure (flow pressure) 6 bar
No. of strokes 20000 min­¹
Eccentric motion speed 10000 min­¹
Sanding stroke 5 mm
Vibration emission value ah (single-axel) 2,7 m/s²
Vibration emission value ah (three-axel) 3,9 m/s²
Air consumption at rated load 290 l/min
Sound pressure level 72 dB[A]
Sanding pad Ø 150 mm
weight 1,0 kg

LEX 3 125 / 3

Main strengths: fine 3 mm sanding stroke produces a very high-quality sanding finish, e.g. in 4-step sanding process. Characterised by a low compressed air consumption, low vibration levels and a pleasant operating noise. Ideal in conjunction with the IAS 3 light hose for permanent dust extraction and high-quality working results.

Operating pressure (flow pressure) 6 bar
No. of strokes 19000 min­¹
Eccentric motion speed 9500 min­¹
Sanding stroke 3 mm
Vibration emission value ah (single-axel) 1,1 m/s²
Vibration emission value ah (three-axel) 3,6 m/s²
Air consumption at rated load 290 l/min
Sound pressure level 70 dB[A]
Sanding pad Ø 125 mm
weight 0,9 kg

LEX 3 77 / 2.5

Main strengths: fine 2.5 mm sanding stroke for surface finishing. Characterised by extreme robustness, low vibration levels, a pleasant operating noise and low compressed air consumption. Ideal in conjunction with the IAS 3 SD with safe dispersion of exhaust air through a compressed air hose. The IAS 3 light hose is recommended for repairing small damaged areas with dust extraction.

Operating pressure (flow pressure) 6 bar
No. of strokes 21000 min­¹
Eccentric motion speed 10500 min­¹
Sanding stroke 2,5 mm
Vibration emission value ah (single-axel) 0,8 m/s²
Vibration emission value ah (three-axel) 1,9 m/s²
Air consumption at rated load 270 l/min
Sanding pad Ø 77 mm
Sound pressure level 72 dB[A]
weight 0,7 kg

CTL

The CLEANTEC version with 36 litre container volume.

  • Approved for dust category L
  • Antistatic function prevents static developing during work
  • Constantly high suction because of the compact high performance turbine
  • Attachment of Systainers via Sys-Dock
  • Hose garage and cable windup for greater tidiness and safety
  • Economical because of the optimal use of the available volume with a SELFCLEAN filter bag in the container

Main applications

  • For dust with limit values > 1 mg/m³
  • Flexible and clean in the workshop and at the construction site thanks to a compact design and a container volume of 36 litres
  • Integral automatic electronic switch-on/shut-off for extraction from electric power tools
  • Suitable for both wet and dry extraction