GLOSS 1000 ML
ZEPHIR GLOSS 1000 ML
Polishing Compound Coarse
QUARZ GLOSS 1000 ML
Polishing Compound Medium
KERAMIK GLOSS 1000 ML
Polishing Compound Fine
DIAMOND 1000 ML
Polishing Compound Ultrafine
แสดงทั้งหมด 14 ผลลัพท์
GLOSS 500 ML
ZEPHIR GLOSS 500 ML
Polishing Compound Coarse
QUARZ GLOSS 500 ML
Polishing Compound Medium
KERAMIK GLOSS 500 ML
Polishing Compound Fine
DIAMOND 500 ML
Polishing Compound Ultrafine
GLOSS 250 ML
ZEPHIR GLOSS 250 ML
Polishing Compound Coarse
QUARZ GLOSS 250 ML
Polishing Compound Medium
KERAMIK GLOSS 250 ML
Polishing Compound Fine
DIAMOND 250 ML
Polishing Compound Ultrafine
LHR 75
FEATURES
LHR 75
This small pneumatic tool allows the operator to reach all the corners and difficult narrow area. Despite it compact size, it maintains the typical BigFoot cutting ability by employing a 15mm (3/5”) orbit. The LHR 75 is primarily used for spot repair operations when it is critical to limit the working area and for the polishing of accessory items such as mirrors, etc.
TWO-HANDED HANDLE
The tool is so well balanced that the operator can easily control it with just one hand. The rubber coated housing cover provides the operator maximum control and the two-handed handle allows for an ergonomic friendly front end grip. Thanks to this feature, even a novice technician can easily handle the tool.
SPEED REGULATION
The variable speed dial is handy, easy to use and allows the operator to control the speed of the tool even when the tool is operating.
ANTISPINNING CAP
The Anti-spinning Cap has a double purpose. It protects the operator and also prohibits the foam pads from spinning freely if the machine is accidentally turned on. Prohibiting the free spinning reduces the stress on the foam pads and prolongs their life.
DESIGN
The unique hi-tech design makes the tool extremely comfortable to operate and has the added benefit of making it very easy for the operator to keep the buffing pad absolutely flat on the targeted surface.
DIRECTIONAL EXHAUST
The exhaust system is carefully designed for maximum noise abatement. Further, the operator can adjust the exhaust so that air is blowing away from his/her arm and hand, maximizing comfort.
(COD. LHR75)
LHR 75E MINI
FEATURES
The LHR 75E mini is the polisher for difficult shapes and for spot repair operations. The LHR 75E mini is a must for any detailer wishing to obtain perfect results, even in the most difficult areas. Thanks to the backing pad with small diameter, the LHR 75E mini is perfect in polishing applications on small and intricate areas. The small machine dimensions and the 12 mm orbit allow a comfortable handling and accuracy in detail polishing.
ERGONOMICALLY PERFECT
With its non-slip rubber inserts on the front cover, the LHR 75E mini is perfect for all polishing operations in difficult to reach areas. The operator can work in perfect comfort to produce the best possible results.
ON-OFF SWITCH LOCK
Lined in non-slip rubber, the on/off lever of the BigFoot polisher ensures a controlled soft start, giving the operator full control over the tool.
DESIGN
The attention to detail is not limited to just the innovative and attractive design. The modern lines and exceptional technical quality are combined with a number of details that are the result of meticulous research aimed at achieving maximum operator comfort. The non-slip rubber inserts are numerous and have many functions. In particular, the insert on the machine body is used to support the polisher when placed on a surface.
MAXIMUM FLEXIBILITY
Thanks to the backing pad with small diameter, the LHR 75E mini is perfect in polishing applications on small and intricate areas. The small machine dimensions and the 12 mm orbit allow a comfortable handling and accuracy in detail polishing.
ELECTRONIC SPEED CONTROL MODULE
The speed controller is both practical and easy to use. The speed of the polisher can also be easily adjusted without interrupting the work.
(COD. LHR 75E mini)
LHR 12E DUETTO
FEATURES
Duetto is equally effective working with soft or interface backing pads teamed with micro-abrasives during the defect correction step or with foam polishing pads and compounds during the polishing stage. Extensive research on random orbital dynamics and exhaustive testing resulted in the choice of a 12mm orbit for duetto. This orbit length greatly improves the surface rectification abilities of the latest generation of microabrasive discs. The combination of duetto and microabrasives is especially effective when smoothing orange peel or significant defects. The finish generated by this combination is both homogeneous and predictable, with no deep sanding marks.
DUAL FUNCTION: SANDING AND POLISHING
The LHR 12E duetto and its 12 mm orbit can be used with fine grit abrasives to speed up deep correction operations. The tool can then use foams and compounds to refine the abrasive scratches and restore a lustrous finish.
ERGONOMICALLY PERFECT
With its non-slip rubber inserts in the front cover, the LHR 12E duetto is perfect for all polishing operations in difficult to reach zones. The operator can work in comfort to produce the best results possible.
ANTISPINNING SHROUD
The dual function antispinning shroud is designed to protect the operator against the moving parts and act as a clutch for the backing pad, preventing further stress on the foam polishing pad when it is not in direct contact with the surface.
DESIGN
The attention to detail is not limited to just the innovative and attractive design. The modern lines and exceptional technical quality are combined with a number of details that are the result of meticulous research aimed at achieving maximum operator comfort. The non-slip rubber inserts are numerous and have many functions. In particular, the insert on the machine body is used to support the polisher when placed on a surface.
ELECTRONIC SPEED CONTROL
The speed controller is both practical and easy to use. The speed of the polisher can also be easily adjusted without interrupting the work.
(COD. LHR12Eduetto)
LHR 15ES
FEATURES
LHR 15ES
The orbit of the LHR 15ES is 15mm or 3/5”. It is shorter than the orbit of the LHR 21ES and is perfect for working in contoured areas and narrow surfaces, making it a favorite of detailers everywhere. The LHR 15ES has less cutting capacity than its “Big Brother” but does offer a higher rpm level. The medium sized pad (150mm or 6”), perfect balance and amazing lack of vibration make the LHR 15ES a “must-have” for every detailer!
TWO-HANDED HANDLE
The tool is so well balanced that the operator can easily control it with just one hand. The rubber coated housing cover provides the operator maximum control and the two-handed handle allows for an ergonomic friendly front end grip. Thanks to this feature, even a novice technician can easily handle the tool.
SPEED REGULATION
The variable speed dial is handy, easy to use and allows the operator to control the speed of the tool even when the tool is operating.
ANTISPINNING CAP
The Anti-spinning Cap has a double purpose. It protects the operator and also prohibits the foam pads from spinning freely if the machine is accidentally turned on. Prohibiting the free spinning reduces the stress on the foam pads and prolongs their life.
TRIGGER LOCK
The trigger lock on the right side of the handle can be depressed to lock the machine in motion. This action allows the tool to run effectively without the operator continuously depressing the throttle lever and is a great help in one-handed applications.
DESIGN
The unique hi-tech design makes the tool extremely comfortable to operate and has the added benefit of making it very easy for the operator to keep the buffing pad absolutely flat on the targeted surface.
(COD. LHR15ES)
LHR 21ES
FEATURES
The LHR 21ES is characterized by a large 21mm (3/4”) orbit that guarantees fast cutting and an impressive finish. The considerable size of the pads is perfect for working on panels and other large surfaces. The tool’s design combine comfort, maneuverability and strength.
TWO-HANDED HANDLE
The tool is so well balanced that the operator can easily control it with just one hand. The rubber coated housing cover provides the operator maximum control and the two-handed handle allows for an ergonomic friendly front end grip. Thanks to this feature, even a novice technician can easily handle the tool.
SPEED REGULATION
The variable speed dial is handy, easy to use and allows the operator to control the speed of the tool even when the tool is operating.
ANTISPINNING CAP
The Anti-spinning Cap has a double purpose. It protects the operator and also prohibits the foam pads from spinning freely if the machine is accidentally turned on. Prohibiting the free spinning reduces the stress on the foam pads and prolongs their life.
TRIGGER LOCK
The trigger lock on the right side of the handle can be depressed to lock the machine in motion. This action allows the tool to run effectively without the operator continuously depressing the throttle lever and is a great help in one-handed applications.
DESIGN
The unique hi-tech design makes the tool extremely comfortable to operate and has the added benefit of making it very easy for the operator to keep the buffing pad absolutely flat on the targeted surface.
(COD. LHR21ES)
เครื่องขัดเหลี่ยม SL 42 AEV
Features
Multihole rubber plate for efficient vacuum (400×70 cm)
Powerful and balanced sander, designed for smoothing and levelling surfaces
High abrasive performance rating
Electronic module with speed control and overload protection
Velcro pad for Velcro abrasives
Fitted with connections to extraction systems
Vacuum flow control
Powerful and balanced sander, designed for smoothing and levelling surfaces
High abrasive performance rating
Electronic module with speed control and overload protection
Velcro pad for Velcro abrasives
Fitted with connections to extraction systems
Vacuum flow control
เครื่องขัดเหลี่ยม RE 21 AL
Features
Extremely well balanced palm sanders
Designed for high abrasive power and for an optimal level of finish
Equipped with multihole rubber plate for optimal suction (70×198 mm)
Speed regulation valve
Designed for connection to extraction systems
Particularly compact and handle body
Excellent extraction capacity
Designed for high abrasive power and for an optimal level of finish
Equipped with multihole rubber plate for optimal suction (70×198 mm)
Speed regulation valve
Designed for connection to extraction systems
Particularly compact and handle body
Excellent extraction capacity
เครื่องขัด RH 156A
Features
Pneumatic random orbital palm sander with central vacuum. Velcro interface.
PATENTED SWITCH LEVER
The new and unique ergonomic design, when pressed, slides forward the switch lever fulcrum lifting the back, creating a stable and ergonomic support for the wrist and therefore for the worker hand/arm system.
SERVICE KEY
In order to easily replace the pad for different applications or for the daily maintenance of your SKORPIO (aspirating and not blowing the dust). Keeping your SKORPIO dust free, improving performance and making it last longer.
MULTI STAGE NOISE SUPPRESSOR
The new noise suppressor guarantees the maximum acoustic comfort even in long lasting applications. RUPES reached a low noise level (only 78dB) without affecting the performance of the SKORPIO.
ANTI SPINNING SYSTEM
Thanks to the rubber shroud, the pad cannot rotate freely, avoiding any possible risk of damage (scratches) when touching the working surface. The shroud also ensures more efficient dust extraction.
DOUBLE BEARING DUST PROTECTED
Increased stability of the SKORPIO during operation and ensures the best protection in the long term even in heavy duty applications.
เครื่องขัด RH 153A
Features
Pneumatic random orbital palm sander with central vacuum. Velcro interface.
PATENTED SWITCH LEVER
The new and unique ergonomic design, when pressed, slides forward the switch lever fulcrum lifting the back, creating a stable and ergonomic support for the wrist and therefore for the worker hand/arm system.
SERVICE KEY
In order to easily replace the pad for different applications or for the daily maintenance of your SKORPIO (aspirating and not blowing the dust). Keeping your SKORPIO dust free, improving performance and making it last longer.
MULTI STAGE NOISE SUPPRESSOR
The new noise suppressor guarantees the maximum acoustic comfort even in long lasting applications. RUPES reached a low noise level (only 78dB) without affecting the performance of the SKORPIO.
ANTI SPINNING SYSTEM
Thanks to the rubber shroud, the pad cannot rotate freely, avoiding any possible risk of damage (scratches) when touching the working surface. The shroud also ensures more efficient dust extraction.
DOUBLE BEARING DUST PROTECTED
Increased stability of the SKORPIO during operation and ensures the best protection in the long term even in heavy duty applications.
S145
Features
Extremely quiet.
Mobile units for extracting dust from sanding and various types of industrial work, fitted for connection to an electro-pneumatic.
Also suitable for fluid extraction.
RUPES patent: S.C.S. Self Cleaning System with filter cartridges.
M.I.C. Multifunction Intelligent Control: manual or automatic start-up, speed control, liquid-level indicator, working-time memory and service-interval indicator for replacement of motor brushes.
Equipped with 2 large filters to ensure constant and efficient filtering capacity.
Electrostatic charge dispersion device.
Large dust and liquid container, with generous rear space for cables and accessories, plus top-mounted ledge for accessories and tools.
Pivotable front connector for hoses, Ø 25 – 29 – 38 – 50 mm.
Extractor, protection class L (EN60335-2-69/A2), suitable for dust with maximum tolerated exposure value >1.0 mg/m3.
Mobile units for extracting dust from sanding and various types of industrial work, fitted for connection to an electro-pneumatic.
Also suitable for fluid extraction.
RUPES patent: S.C.S. Self Cleaning System with filter cartridges.
M.I.C. Multifunction Intelligent Control: manual or automatic start-up, speed control, liquid-level indicator, working-time memory and service-interval indicator for replacement of motor brushes.
Equipped with 2 large filters to ensure constant and efficient filtering capacity.
Electrostatic charge dispersion device.
Large dust and liquid container, with generous rear space for cables and accessories, plus top-mounted ledge for accessories and tools.
Pivotable front connector for hoses, Ø 25 – 29 – 38 – 50 mm.
Extractor, protection class L (EN60335-2-69/A2), suitable for dust with maximum tolerated exposure value >1.0 mg/m3.
KS-260
Features
– Mobile extraction unit equipped for simultaneous connection to two tools, both electric and pneumatic
– Robust, stable and highly manoeuvrable machine
– TÜV certification assures the operator of a high degree of quality and safety
– Powerful and reliable, each fitted with two 1000 W motors
– Dual start-up system:
1) manual
2) automatic, with a significant energy saving
– Optional selection of two speeds to optimize extraction according to the
number of tools connected
– Class M certificated filter (EN 60335-2-69)
– Highly-efficient filter system thanks to dual protection
– Pratical front door (patented by RUPES) to simplify the access to the dust collection bag
– Detachable side panels for storing extraction or power tubes
– Robust, stable and highly manoeuvrable machine
– TÜV certification assures the operator of a high degree of quality and safety
– Powerful and reliable, each fitted with two 1000 W motors
– Dual start-up system:
1) manual
2) automatic, with a significant energy saving
– Optional selection of two speeds to optimize extraction according to the
number of tools connected
– Class M certificated filter (EN 60335-2-69)
– Highly-efficient filter system thanks to dual protection
– Pratical front door (patented by RUPES) to simplify the access to the dust collection bag
– Detachable side panels for storing extraction or power tubes